Page generated in 0.16257 seconds with 21 queries [Server Loads: 0.70, 0.62, 0.53]
04-11-2012, 02:23 AM
|
#1
|
|
Registered Newbie
Join Date: May 2011
Location: NJ
Posts: 9
|
Borg Warner S410 turbo?
Anyone know any details on this thing? I know a place that has them for cheap but I have a LSX 454 and I know I need a BIG turbo that will not choke the motor up top. All I know so far is that is has a 5" inlet and 3" outlet with a funny looking t6 hotside on it with 1.0 AR. It's compressor wheel is billet and it has an anti surge compressor housing too. All in all it LOOKS big enough but what really matters is the blades size. They use them on Frieghtliner MBE400 diesel trucks. Part number is A0100960199. It's a upgrade for the OE unit.
Last edited by slippi84; 04-11-2012 at 03:07 AM.
|
|
|
|
04-11-2012, 08:42 PM
|
#2
|
|
gettin' screwed...
Join Date: Feb 2004
Location: PCB, Fl
Posts: 6,622
|
Being that turbo is spec'ed for a 12.8L diesel, it is hardly ideal for a high revving 7.4L gas motor in regards to both airflow characteristics and packaging. But will it 'choke' your 454, probably not. However, I would consider going a different route with a turbo more suited to your application. You've spend good money on that motor, I would hate to see a hack-job turbo system on it.
|
|
|
|
|
04-12-2012, 02:41 AM
|
#3
|
|
Registered Newbie
Join Date: May 2011
Location: NJ
Posts: 9
|
Yeah I got specs on the turbo it's only a 66mm inducer with 93mm exducer compressor side and 87mm inducer and 77mm exducer on the hotside so the exhaust side is good but I would like something more like a 83mm inducer compressor wheel. No biggie the S400's ebay are cheap no point cutting corners when they're that cheap.
|
|
|
|
Lower Navigation
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +5.75. The time now is 08:50 PM.
|
|
