PDA

View Full Version : Turbo Tech Race System 775/840

MIGHTYMOUSE
02-16-2004, 11:42 PM
now i have to extend my bragging here :)

flip through the links at the bottom.

http://home.comcast.net/~deezuns/
408Ashman
02-17-2004, 12:05 AM
I went over your post about 10 times over on LS1...it's still impressive :)

if u don't mind me asking, what size injectors are u using?

TIA

Alex
MIGHTYMOUSE
02-17-2004, 12:08 AM
60# from mototron... they are awesome.
408Ashman
02-17-2004, 12:13 AM
Originally posted by MIGHTYMOUSE
60# from mototron... they are awesome.

cool, thanks for the info...one more thing: did u buy directly from them? or tuner shop?

thanks again

Alex
MIGHTYMOUSE
02-17-2004, 12:15 AM
direct purchased.
Mark C.
02-17-2004, 02:26 AM
Absolutely awesome numbers man. What was your A/F ratio? You're using the ITS GT80/R? Is it divided? DBB? Which a/r are you using? .81? How is the spool on that thing?

I've got a buddy of mine that put one on his supra...it's got a bit of lag :D ...but it also has got about 1000rwhp :)
MIGHTYMOUSE
02-17-2004, 04:02 AM
ill hit the ones i know.. its a gt80r daul bearing. .96

spool is around 3500, a/f is on each graph.. it depends on boost and octane.

thanks very much :)
Warbird
02-17-2004, 04:49 PM
MM,

Can the Mototron's be tuned using the stock PCM? As you know I am looking for more of a street build-up and was going to use the Siemens 57# injectors.
Blue99Ws7
02-17-2004, 05:51 PM
Are you using a dfi setup? And how much did that run you?
MIGHTYMOUSE
02-17-2004, 06:04 PM
yes i have the dfi with the wideband option, purchased through turbotechnology, they installed as well.. didnt ask the price :(

paul these 60's work fine with the stock computer (high impedance) i ran them before i sent the car out there no problems on stock displacement n/a

we are only just past 80% duty cylcle with them right now on the car., pretty awesome.
Warbird
02-17-2004, 06:46 PM
I was a little concerned about them because some high imperdence injectors seem to only want to run in open loop. I think I might re-assess my Siemens and look into these.

My goal is to stay stock PCM, Air to Air IC and stay away from non-streetable things like Alchy kits. I should have some initial pics real sson :D
MIGHTYMOUSE
02-17-2004, 08:16 PM
cool, post em up, dont be all sneaky about it.. i hate those guys ;)
mshiznitzh
02-18-2004, 01:45 AM
Awsome numbers.
Teufel Hunden
02-18-2004, 08:54 AM
awesome numbers? Eh... i've seen awesome-er....


j/k. :D
I too looked that over on LS1.com several times and it's STILL pretty impressive.
WS6TransAm01
02-18-2004, 05:28 PM
turbo's are a;ways fun :D