Turboed 3.8 dyno numbers

[snatchss454]

http://www.camarov6.com/ubb/ultimatebb.php?ubb=get_topic;f=4;t=001442;p=1#000000

Just wanted to let you guys know how the V6 fbodies are doing!!Please no flaming.
Thanks,
Shane

[Teufel Hunden]

Not bad numbers at all.... That's off of the stock tubular manifolds correct? Any mods to the rest of your exhaust? Cat, Cat-back?

[snatchss454]

thats a completely stock engine with tubular exhaust manifolds, and most likely an open down pipe. Besides the the race gas those are the only mods Im aware of.
Shane
P.S. By the way thats not my car, thats the beta tester's car for our new turbo kit

[5.0THIS]

Originally posted by snatchss454
thats a completely stock engine with tubular exhaust manifolds, and most likely an open down pipe. Besides the the race gas those are the only mods Im aware of.
Shane
P.S. By the way thats not my car, thats the beta tester's car for our new turbo kit

found out if you can the specifics of the exhaust behind the manifolds, ie an open downpipe, cat, catback.. what? thanks

[Teufel Hunden]

Also, i'm curious to see what that dyno sheet looks like... tell the owner to post it up over here! :D

[snatchss454]

it was an open downpipe, and I asked them to post the dyno sheets from the 7psi run as well as the 15psi run. I will let you know when they are posted.
Shane

[snatchss454]

http://www.camarov6.com/ubb/ultimatebb.php?ubb=get_topic;f=4;t=001449;p=1#000005

Here are the Dyno sheets
Shane

[Teufel Hunden]

WOAH, what happened there on the 15psi run?

[stoleit]

very impressive!!! 3g's? thats cheap! I wish they could make kits for the ls1 only 3g's....

[snatchss454]

actually they had a group purchase and it only cost 2500 bones. On the 15psi run I think your talking about the sudden drop off at 4400 rpms this is a quote from the previous thread:
"Still at the dyno.

At 15psi we got 352hp and 416tq at 4400rpms!!!!!

The car is cutting out because it is running so rich. It is maxing out the chart at below 10.

I still have the STOCK pump STOCK injectors and the booster pump and a 6:1 fmu that comes with the turbo kit."
Shane

[Teufel Hunden]

Ok, i read that thread over there again.. he just needs an adjustable FMU (which is what i'm going to be running). Good tuning software will be available for these cars in the coming months... meaning, we'll be able to get away from FMUs all together :woot:

That inline booster, it's an MSD correct?

[AtomicVette]

yeah that guy's in my club.. he's doing really well with that thing. here's some more stuff on it.

http://www.ws6zxr.com/showthread.php?s=&threadid=29450

[RicksWS6]

Nice for a V6!!!!!!