PDA

View Full Version : FS LT1 Stall ~4000-4400 stall


BLK95TA
07-22-2004, 09:34 AM
FS: TCS 4000-4400 LT1 stall with lockup
Stall has around 5000 miles on it. 2.7STR and was built with over 500hp in mind with apower adder. Really nice stall but still very driveable on the street.

I am selling because I converted to a 6spd setup and its no longer needed. Asking $375 OBO plus shipping. Thanks.

BLK95TA
07-28-2004, 05:55 AM
ttt

texasTA
07-28-2004, 02:55 PM
How would a stall like this do with this setup:
K&N FIPK
Hooker Longtubes through 3 inch True Duals
233/239 111lsa Combination Cam
1.6 Pro mag 7/16 RR
hardened pushrods
Racetronix Fuel Pump
30 # SVOs
OVC wire setup
3.73 gears
Fully built 4L60-E tranny
and down the road (possibly 4 or so months) a NX 150 wet shot

Would I be making enough power for a stall like that N/A? And if so, what do you think the stall speed would be with my setup?

Thanks

texasTA
07-28-2004, 02:56 PM
Oh, and I have a 94 Trans Am, so would the OBd1 high stall issue be a concern? I know they can program for it, but is this too high?

BLK95TA
07-28-2004, 10:42 PM
I think you would be ok as long as you shift at 6000+. I used the stall in my blower setup with a 230/242 114lsa cam. I had the computer programmed by Jeff Creech at Carolina Auto Masters when he came to Dallas and done the dynotuning at the Kwik Kar. I never had a problem with the high stall OBD1 issue. If you have a way to send him your file, he could probably write the code to it to make sure you wouldnt have the problem as well.

sean baker
07-30-2004, 10:01 AM
what gear ratio was the converter set up for? and where are you located?

BLK95TA
07-30-2004, 01:26 PM
I'm located in Texarkana. I used 3.73s with this stall, although I'm sure other ratios could be used.

BLK95TA
08-01-2004, 08:12 PM
ttt

BLK95TA
08-19-2004, 09:06 AM
ttt..Here are some threads about these converters. I'll post one of the messages from Joe Overton:
I myself runs one as well, Mike kleman..Now Tim Jewel is knocking down numbers and theres few others as well...Its only ashame that family own businesses go bad sometimes...Derek made kick @zz converters without a doubt..
__________________
Joe Overton "The Underdog"
"Worlds Quickest "Stock" Suspended N/A Lt1
F-Body"
94' Trans Am -388 ci. Lt1
9.50@142.37 all motor 1.35 60 ft (footbrake)
best 1/8 6.047@112.98
best 1/8 mph 113.8
best 1/4 mph 142.37
for now


http://www.ls1tech.com/forums/showt...0&highlight=tcs

http://www.ls1tech.com/forums/showt...2&highlight=tcs

http://www.ls1tech.com/forums/showt...5&highlight=tcs

http://www.ls1tech.com/forums/showt...2&highlight=tcs

RallyRed701/2
08-23-2004, 02:35 AM
this would prolly not work too well on my car would it... check sig..:(

BLK95TA
09-16-2004, 06:59 PM
ttt:)