Verbs
07-15-2004, 11:28 PM
These heads were sent back to TEA to be refreshed for resale.
They made 440rwhp/401rwtq through a 12 bolt with 3.73's and heavy wheels with my old setup; 10.8:1 compression and a 230/224 .576/.563 110.8 LSA cam.
With a bigger cam like a G5X3 and more bolt ons like an Electric Water pump and LSX intake, 455-460rwhp is easily doable with these heads through a 12 bolt!! .
New freshened Flow #'s are
Lift Intake Exhaust
.100 69.3 53.4
.200 136.8 110.1
.300 197.6 154.8
.400 247.6 197.1
.500 287.5 230.7
.550 300.5 242.3
.600 309.1 249.2
These heads come with Crane 832 dual valve springs with only 500 miles on them, and brand new titanium retainers and locks. The Crane 832 duals are good to .650 lift!!! This valvetrain setup alone is worth $360 brand new!!!
Milled .015 for roughly a 10.9:1 compression; 2.02 Ferrea Intake Valves and 1.55 UDI dished exhaust valves.
NO CORE CHARGE NEEDED!! It's like paying $900-$950 for these heads plus a standard $350-$400 for the core charge!!
Asking $1250 shipped.
They made 440rwhp/401rwtq through a 12 bolt with 3.73's and heavy wheels with my old setup; 10.8:1 compression and a 230/224 .576/.563 110.8 LSA cam.
With a bigger cam like a G5X3 and more bolt ons like an Electric Water pump and LSX intake, 455-460rwhp is easily doable with these heads through a 12 bolt!! .
New freshened Flow #'s are
Lift Intake Exhaust
.100 69.3 53.4
.200 136.8 110.1
.300 197.6 154.8
.400 247.6 197.1
.500 287.5 230.7
.550 300.5 242.3
.600 309.1 249.2
These heads come with Crane 832 dual valve springs with only 500 miles on them, and brand new titanium retainers and locks. The Crane 832 duals are good to .650 lift!!! This valvetrain setup alone is worth $360 brand new!!!
Milled .015 for roughly a 10.9:1 compression; 2.02 Ferrea Intake Valves and 1.55 UDI dished exhaust valves.
NO CORE CHARGE NEEDED!! It's like paying $900-$950 for these heads plus a standard $350-$400 for the core charge!!
Asking $1250 shipped.