help

[00ws6T/A]

Well just got back from the 10 hour round tip to get my tnt kit,need some pointers on installing thanks:help:

[GOT SPD]

That is kind of a vague request. If you have specific questions I would be more than happy to answer them.

[00ws6T/A]

Well just something to look for,like the guy I bought the kit from said too point the jet away from the maf,so that means the jets wounld be spraying away from the motor in the air box?

[GOT SPD]

so it is a dry kit? If so then that is correct, if you point the jats directly at the maf then there is a good chance you will freeze the maf and when that happend it just dumps fuel and you go way rich. You want the nitrous to go away from the motor so it mxes better with the are coming in and you end up with an overall cooler charge of air.

Those kits are pretty easy to install, just a little time consuming. Take your time and follow the directions and you should be fine.

There are a couple of good threads in the section conserning the wiring and the addition of a window swtich that you may want to check out.

Also familiarize yourself with some of the technical documents at the top of this forum because if you have never run nitrous before there is some important things to know. Nitrous is your freind if you respect it.

[00ws6T/A]

Thanks alot man for the tech talk,I like when I ask a ? I get a reply that is pretty:cool: THANKS AGAIN:D

[GOT SPD]

Originally posted by 00ws6T/A
Thanks alot man for the tech talk,I like when I ask a ? I get a reply that is pretty:cool: THANKS AGAIN:D

Any time bud, that's what this board is here for. :)