Upper Panhard bar bolt part #

[skytower31]

Does anyone has a part number for the bolt on the passenger side of the upper panhard bar, if that is the correct name? It is the bar that runs above and parallel to the panhard bar. It has a bolt/nut/bushing on the passenger side and three standard bolts on the driver side. I need to bolt on the passenger side because I stripped the head pretty good. I believe it is the same bolt as the panhard bolts.

In the pic below, it is the bolt above the bolt that is labeled. Thanks!!!

http://www.installuniversity.com/install_university/installu_graphics/freshman_year/panhard_bar/phb_locator.jpg

[Mike Hawk]

Take the bolt to Lowes/homedepot. They'll have a whole mess of metric bolts. Dunno if they'll have a thread guide that big, just take the nut with you and see if it works on the new bolt.

Edit - And curious to why you were taking the upper bolt off?

[skytower31]

When I was installing my GMMG catback a few weeks ago, I dropped the PHB and upper PHB so I could get the pipe over the rear axle. I didn't even neeed to loosen that side of the upper PHB, but I did, so when I went to tighten it, I stripped the head of the bolt. It is actually a 13/16" bolt head so I had to use a expanding crescent wrench (which I always f-up heads when I use). So yeah, I am dumb...:mad: