View Full Version : '01 Corvette Z06 with ATI ProCharger - 530hp!
Exotic Performance Plus
05-30-2004, 03:09 PM
'01 Corvette Z06 with ATI ProCharger 530 hp!
http://www.exoticperformanceplus.com/hotCars.php?car=49
Check out the above link to my website, which shows the power we made on a stock Z06, with an ATI ProCharger installed.
:)
dvandentop
05-30-2004, 09:21 PM
sweet wish i had the $$$
Performin Norman
06-01-2004, 04:49 PM
Nicely done. :D
Exotic Performance Plus
06-03-2004, 12:22 PM
Thanks. Bob
c5kid
06-11-2004, 09:19 PM
is that a stock bottom end? i just had my dipstick push up last nite, first time it did it but i know what it could possible mean and i am scared.....
but i have no check valve in the PVC system and I am hoping it was just a rare case like that..... cause i have run the car hard before just this once i pulled the car in and seen some smoke and smell of oil burning, popped the hood and seen the dipstick up about an inch.
Exotic Performance Plus
06-12-2004, 02:26 AM
Yes it is the stock bottom end. The stock bottom end holds up just fine unless you start pushing some crazy boost, or you don't have the air/fuel at 12:1. Bob :)
c5kid
06-12-2004, 04:01 AM
yeah, tonite i gave another good couple of runs, dipstick didn't go anywhere, i don't know why it did it but i had me scared, i have my a/f set at 11.4, i know it is really rich but i am playing it safe..:rolleyes:
Exotic Performance Plus
06-20-2004, 04:23 PM
Originally posted by c5kid
yeah, tonite i gave another good couple of runs, dipstick didn't go anywhere, i don't know why it did it but i had me scared, i have my a/f set at 11.4, i know it is really rich but i am playing it safe..:rolleyes:
Has your dipstick been staying down this past week? Bob :)
c5kid
06-20-2004, 04:34 PM
yep stayed in, and i pressure washed all the oil off the side of the block and oil pan, no more stinky oil smell after i turn the car off. just a false alarm i think/hope
c5kid
06-20-2004, 04:37 PM
oh one other quick thing, have you guys ever hooked a vaccum pump up to help w/ the crank case pressure? I have a electric vaccum pump i am planning on hooking up and wiring it to a pressure switch like the boost a pump so when i start making boost it turns on and helps seat the rings better...
Exotic Performance Plus
06-21-2004, 01:33 PM
I've never tried it. Let us know how if works out for you. Bob :)
Exotic Performance Plus
08-04-2004, 12:30 PM
ttt
vBulletin® v3.8.5, Copyright ©2000-2012, Jelsoft Enterprises Ltd.