I finally got a baseline dyno on my car

[jermstyle]

I took my 2002 M6 SS and had it dynode on a very new Dynojet.

The car is bone stock other than the SLP 335 CME package and loudmouth exhaust.

I made 310/325 SAE Corrected and 318/32X uncorrected.

Is this about right for a stock LS1? I think I could make around 325 corrected if I just had a lid and filter.

[SSean]

Those numbers look about right. Now let the modding begin :devil:

[jermstyle]

I think this dyno gives pretty low numbers also. And my uncorrected HP was 316 or 318.

I'm going to get LT's, Y-Pipe, Lid, Filter, and Pulleys and make another pull for the stock internals baseline.

[jrp]

those numbers fall in the normal range, dont get caught up in "this dyno gives low/high numbers", ect. a dyno is a tuning device, nothing more, nothing less.

[Mark]

Not bad numbers Jeremy. I put down 312/325 when I did my first dyno.

[jermstyle]

I really need to get my build number. Our cars are probably pretty close together.

[Constrictor]

Those are perfectly normal numbers for a stock M6 car. A lid and filter are not going to give you 15RWHP.

Let the modding begin! :D

[MeentSS02]

Originally posted by jrp
those numbers fall in the normal range, dont get caught up in "this dyno gives low/high numbers", ect. a dyno is a tuning device, nothing more, nothing less.

Those are words to live by...