BBK Throttle Body only $265

[1BadMoFo]

Perfect conditioin BBK throttle body from my 2000 Camaro SS. Was on the car for about 3 months. I'm selling because I need some new 315's for my new rims, and I'm starting to gear towards showcar rather than max HP so I've got a polished TB on the way. Proven gaines of up to 8 - 10 RWHP and it looks much better than stock I say.

I bought used for $275 plus freight, then had to go out and buy the 1/2" spacer plate required for $40 plus freight, and then the paper gasket for $25.

Asking $265 plus freight for everything needed to install, costs $399 new.

paypal accepted at scott.fetterman@excite.com.

Preferred email is scottfett2000@yahoo.com.



http://www.tbyrnemotorsports.com/ls1/bbktb.jpg http://images.cardomain.com/member_images/12/web/516000-516999/516593_6.jpg

[KissMySS]

I'll give you $150 for it?

[1BadMoFo]

I need tires, but not that bad...I just checked Tbyrne's site and it's still $399 new...thanks though.

Scott

[Slowverado]

why is the spacer required? what is your bottom line on this thing?

[1BadMoFo]

I have a sale pending, but you'll be #2 if you'd like.

The spacer is required because of the larger diameter opening and plate on the BBK. It's actually bigger than intake, 80mm versus 76mm, so at wide open throttle, the plate would hit the intake. the plate is also beveled a little bit to reduce the opening size down to 76mm so that the air flow is perfectly smooth.