Oil Pressure Gauge stuck...

[BlwnInterceptor]

Coming home from work, I noticed the oil pressure gauge was maxed. I restarted the car a few times to see if that would help, but nothing.

Any ideas???

Thanks,
Jason

[98C575k]

Easy. Oil Pressure Sending Unit. Time to replace. Only about $35 DIY. However, you have to move/take off the intake manifold. Which really isnt that bad: fuel rail clips, bolts, unplug vacuum lines, and move off. There some write up somewhere how to take it off. I need to take my manifold off too sometime, so let me know how it goes. Supposedly, you can just slide it forward about 6 inches to get to the unit, but dont forget about the AC vacuum line in the back. Would recommend doing ASAP...so you are not blind to what is happening with the PCV valve.