Code 48

[TransAmDriver]

Mass Airflow system failure.:angry: :bashhead: :chairhit: :cry: :cuss: :cry:

[brokenz]

Originally posted by TransAmDriver
Mass Airflow system failure.:angry: :bashhead: :chairhit: :cry: :cuss: :cry:
Did you figure it out yet? Got a buddy with a MAF sensor you could swap out with? I don't know if oil in the MAF would cause an actual code but I've fixed alot of cars that were running rough because owners had overoiled their K&N's. :)

[TransAmDriver]

Originally posted by brokenz
Did you figure it out yet? Got a buddy with a MAF sensor you could swap out with? I don't know if oil in the MAF would cause an actual code but I've fixed alot of cars that were running rough because owners had overoiled their K&N's. :)

Nah I havent re-charged my K&N in over a year. I believe it kicked the bucket for shure, it slowly went.

[TransAmDriver]

Would anyone happen to have a spare MAF laying around. ;)

[transamtom]

Originally posted by TransAmDriver
Nah I havent re-charged my K&N in over a year. I believe it kicked the bucket for shure, it slowly went.

Check your wiring harness,I got a 48 and it turned out to be a bent prong on the weather pack connector.

I must of bent it shoving it back on to quick.

[TransAmDriver]

It all checked out, but thanks for the help! I took it off and cleaned it, then reset the code with my laptop and it came right back. Then it was reading a constant 511 gm/sec of airflow at Idle which in reality is about 15%-20%load on the engine, this is why it smoothed out if I held the rpms at 2k. I got a new MAF off of a CZ28.com buddy.:)

[transamtom]

Good to hear you have it fixed:cool:

[SlowLX]

now get your country ass to the track