Z06 Rims

[85Z28350]

I always see Z06 rims for 93-02 Camaro's but can they fit on a 85 IROC z/28?

[RallyRed701/2]

bolt pattern is the same for all fbodies, all you need to do is take backspacing into consideration. So basically..... yes...

[jmd]

they have a lot more positive offset (more backspacing) but there might be aftermarket ones which fit, or adapter spacers might be used.

[mmmchickenboy]

the biggest problem is with the front wheels. if you have a 3rd gen, try putting a rear wheel on the front and you will see why. the cap on the end of the rotor will pop out the center cap of the rear wheel. the rotor/bearing/hub assemblies are diifferent between 3rd and 4th gen. they will not allow the use of most wheels designed for 4th gen that have center caps. its difficult to explain without pictures...

[BULLET99Z28]

4th gen wheels will fit with wheel spacers. contact fbodymotorsports. they have exactly what u need:2guns:

[gixxer92]

http://www.skulte.com/gallery/search.php?searchstring=adapter&go=Go!

http://www.skulte.com/

If you want to corner, make sure your running hub centric spacers.

[barnat]

Have you ever seen the black webed 89 GTA rims with the polished lip on an IROC??? bad ass dude It will go with any color too! just my iponion though