PDA

View Full Version : help!


birdbasturd
07-26-2005, 09:51 PM
I'm looking at a '68 400 firebird. Were is the vin code on the motor located exactly?

my1973form
07-27-2005, 06:14 PM
I believe you are refering to the cast number not the Vin code, I believe the cast number it is located below the passanger head stamped into the block. Also there is a letter code above the block case #
Here are the 400's cast #'s
1968 400 9790071
1968 400 9792506 Ram Air 4 bolt

YEAR CODE C/I HP TRAN CARB CAR MISC
1968 YA 400 265 A 2 FULL
1968 XM 400 265 A 2 TEMP
1968 YA 400 265
1968 WA 400 290 M 2 FULL
1968 WB 400 290 M 2 FULL
1968 YC 400 290 A 2 FULL
1968 YT 400 330 A 4 FB
1968 YW 400 330 A 4 FB
1968 WQ 400 335 M 4 FB
1968 WZ 400 335 M 4 FB
1968 WI 400 335 M 4 FB RA II
1968 XN 400 335 A 4 FB RA II
1968 YE 400 340 A 4 FULL
1968 WU 400 340
1968 XT 400 340
1968 XZ 400 350 M 4 FULL
1968 XH 400 350 A 4 FULL
1968 YS 400 350 A 4 TEMP
1968 YZ 400 350 A 4 TEMP
1968 WT 400 360 M 4 TEMP
1968 WS 400 360 M 4 TEMP
1968 XS 400 360 M 4 TEMP
1968 XP 400 360 A 4 TEMP
1968 WY 400 366
1968 XW 400 366

Hope this helps some...

birdbasturd
07-27-2005, 10:12 PM
thanks

PontiacFan
07-28-2005, 02:42 AM
There may also be a matching VIN number stamping, on the lower front left side of the block. Next to the lower section of the timing chain cover. You have to get under the car to find it.
(I believe they stopped doing the matching number thing maybe in '71 or '72, but not too sure about it.)
Of course I may be wrong on all of this. But I will gaurantee one thing, I had a '68 LeMans for a few years recently, & it most definitely had a matching VIN number on the lower section on the front of the block. In fact, if you PM an email address, I can share the photos of where to look.
(Crap, I can't share photos right now afterall becuase my other computer is down this week, awaiting a new motherboard & power supply, ..., may be back up by this weekend tho if you want to see the photos for proof & for assistance in seeing where to look.)

birdbasturd
07-28-2005, 04:58 PM
Thanks for the reply, I got the # I needed.

Chief Pontiac
08-05-2005, 04:54 AM
The vin and trans/engine code is on the machined surface below the passinger side head.The casting #/date for the shortblock is near the # 8 cylinder near the rear of the block.Also some blocks had the CID displacement #s cast into them but not all blocks had it.