Just installed 4.10's!!

[JSTAZ28]

Just like the topic says. I cant wait to break in the gears. Well traction was fun while it lasted lol.

[FlagSStaff]

Heh heh... best of luck to ya, buddy! :p

[Tranzor_Z28]

You'll enjoy them... I love my 4.10s! :D

[JSTAZ28]

I'm sure i will but my tires won't lol.

[1BADFIREHAWK]

I love mine! Best mod you can do with an M6 for the money I think! :D

[coop5885]

i would love to get a set of 4.10s, but hell i cant get traction as it is.....shitty falken tires that came on it.

oh well.

[brandon]

How much was everything? Gears? Install? Recal?

[NBMWSsix]

I personally have 3.73's and like them. I think they are the best combination of off the line acceleration and highway crusing. Original 3.42's @70mph had me at about 1,500 rpm and now I am at about 1,700. Not too bad. But as stated for the way it makes you pull one of the best bangs for the buck. I walked a friend of mine with my mods (not much I know) and he had LT's with 3.42's though.

[bRa_DeN]

the 4:10's are awesome if you have the right setup to make the car stick if not and your a person like me who does alot of daily driving then i would go with the 3:73's;)

[brandon]

I'm serious about prices. I'm getting gears in March. What did everyone pay?

[1BADFIREHAWK]

Originally posted by brandon
I'm serious about prices. I'm getting gears in March. What did everyone pay?

Gears are around 200. The install kit around 100. Then if you have someone install them which is probably the best idea its around 2-400 dollars. Then you need a way to recalibrate your speedo, a used hypertech 150. All together its gonna run you 750 or so. Or you could swap a compatible rearend like I did. Got a 4.10 rearend with TCS and ABS for $350 and just swapped them out! Good luck!:D

[NBMWSsix]

Originally posted by 1BADFIREHAWK
Gears are around 200. The install kit around 100. Then if you have someone install them which is probably the best idea its around 2-400 dollars. Then you need a way to recalibrate your speedo, a used hypertech 150. All together its gonna run you 750 or so. Or you could swap a compatible rearend like I did. Got a 4.10 rearend with TCS and ABS for $350 and just swapped them out! Good luck!:D

:stupid: I swapped my stocker with a guy that had 3.73's for $250 and did it my self. Otherwise you just need to start asking around with the local shops or one that is within a reasonable driving distance.:drive:

[99hawk409]

You can find some shops that will setup the rear gears for pretty cheap. My guy did an awesome job and charged less than 100$
and he's not known for being terribly cheap.

4.10s rule!

3.73s wouldn't be enough of a change to be worth the effort in a M6 at least.

[JSTAZ28]

Originally posted by brandon
How much was everything? Gears? Install? Recal?

Sorry about the late reply. I got a deal at thunder racing. I got gears, install kit, 2qts of gear oil, posi fluid, ta guridle, and ta stud kit for $417 shipped:) I had the speedo fixed to read correctly for $100 and had the gears installed for another $ 100. Total $617 out the door! I think i saved the most money on the install. I hope this helps.

Tony

[Mike98WS6]

Good luck with the 4.10's. There a blast in the street.

[Chevcamaro18]

I have had 4.10s on my M6 for a while now. Traction is ok as long as you know how to handle it:D

[Eiyse98ls1]

just got done breaking mine in but now i feel a vibration or pulsation going over 70mph.. im regreting doing this... hopefully nothing else was damge when i bent a axle causing the vibration..

what you guys think..

[INDA10Z]

Originally posted by JSTAZ28
Just like the topic says. I cant wait to break in the gears. Well traction was fun while it lasted lol. you will get better traction with the 4:10s --they dont spin as fast as say a 3:23

[99hawk409]

Originally posted by INDA10Z
you will get better traction with the 4:10s --they dont spin as fast as say a 3:23

Whaa Choo Talkin' about Willis!?!?

Lots more torque going to the wheels with 4.10s
Tires will spin MUCH more easily


:p