98 incon guys, question on fuel system.

[slow]

E, or anybody else with a 98, do you know what the part number for the fuel lines that came with the incon kit were? Im fairly sure they were V6 lines, just trying to confirm that they were from a 98 v6, before i go searching for a set.

I have the part number from harlan for the 99+, but i need the 98 lines, for my return rail setup, im planning.

If you know the part number... or ever better yet, if somebody has the parts, and rails, (from an upgrade to better stuff) and wants to sell, let me know.

Im fairly sure this is just 98 only, as the 98's fuel tanks are different.

Ryan.

[eboggs_jkvl]

The fuel lines with the incon kit were my stock lines. We didn't run anything different on the fuel lines. They are totally stock. The OEM intank pump was changed to a Walbro.


E:)

[slow]

ok, thanks

I don't know what stage harlans was, but im guessing stage 2, as he used some stock fuel lines, as well as a modified 1997 vette rails.

I guess i'll have to ask him if those parts came with the kit, or is they were just what he used. The way his site looked, it sounded like they came with the kit. But i'll contact him.

Ryan.

[Scott 98Z M6]

Matt's was a stage 1 Incon car. He did his own custom fuel system with some of the pieces that you mentioned above.

There were no additional fuel system pieces for the Incon kit other then the Walbro pump, the regulator, and the plug for removing the stock, in-tank regulator.

Even the stage 2 Incon kits did not come with add'l fuel lines. All that stage 2 offered was 2 additional injectors and a controller box to play with fuel and timing (this was made obsolete by LS1Edit and I doubt anyone is still using it for timing and fuel).

[slow]

thanks.

after reading his site, that wasjust what he used.

I am still searching for a set of 97 rails, but they're hard to find :(


Ryan