Cammed 350 TPI's?

[HartAttack]

Who has done cam/headers and tuning and got good results and numbers??
what kind of cam did you go with?

[z28motorsports]

i am running an lt4 hot cam and some hooker long tubes......and a custom burned chip........with the stock chip i had a 13.10 1/4 mile pass at 106

[HartAttack]

Originally posted by z28motorsports
i am running an lt4 hot cam and some hooker long tubes......and a custom burned chip........with the stock chip i had a 13.10 1/4 mile pass at 106
so it didnt have any problems running without a tune and that cam? Did you change springs etc?
and i cant seem to find long tubes for this car...just shortys.
Also were you running a stall converter also?

[z28motorsports]

well i have a lil more than just a cam..i have world products sportman 2 heads and a bbk twin 58 mm t/m and adjustable fuel pressure reg.the long tubes are from hooker for the third gens.........and i'm running a tci ssf 3400 to 3800 stall w/4.10 gears in the rear

[mrr23]

my old 86TA never did any tuning for the longest time. http://www.fl-thirdgen.org/mrr23

[Juiced2000SS]

I ran the LT4 Hot Cam for a while in my 350 w/o tuning. But I did use a chip from a 89 Vette 6sp. The manual cars had the higher idle. Ran fine. Hooker makes the LT's but ground clearance sucks.