What do do to get an 02 Z06 to 11.5 et

[MistaZ]

I am planning on selling my 99 Z28 and lexus in about a year or so when the new vette comes out. I plan to pick up an 02 z06 and was wondering what it takes to get that car into the mid elevens. Thanks guys!
:confused:

[dvandentop]

$$$ :D

some drag radials, and Nitrous and cold air intake and a good driver :D

[Durien512]

Boltons with Tires will get you there

[Bayouvette]

4.10's and drag radials..
thats it..

[ulllose]

in other words probably not to much. A Good tune with headers would put you in the 380 ish RWHP no problem,,,a set of DR's and you will be in the high 11's at least....

[Cam]

Originally posted by Durien512
Boltons with Tires will get you there :werd:

[GarySS]

Originally posted by Durien512
Boltons with Tires will get you there
....and don't forget the most important thing....a good driver :D

[MagRedC5]

Originally posted by MistaZ
I am planning on selling my 99 Z28 and lexus in about a year or so when the new vette comes out. I plan to pick up an 02 z06 and was wondering what it takes to get that car into the mid elevens. Thanks guys!
:confused:
You could add the Pro LG LT Header System with LS1 Edit on a 2002 Z06 & see around 377-385rwhp. To get up to around 425rwhp add the G5X-3 Cam Pkg. w/Comp 921 Dual Springs.
Check out this link (http://forums.corvetteforum.com/zerothread?id=715230&page=1)

[Cam]

Originally posted by GarySS
....and don't forget the most important thing....a good driver :D :umm: I can vouch for that!! :D

[habib]

4.10s, air intake, et streets

[Exotic Performance Plus]

ATI ProCharger will give you 530hp, which will get you into the eleven's even if you're blindfolded. :D

Check out this link. Bob
http://www.exoticperformanceplus.co...s.php?service=6

[408Ashman]

Originally posted by Exotic Performance Plus
ATI ProCharger will give you 530hp, which will get you into the eleven's even if you're blindfolded. :D

Check out this link. Bob
http://www.exoticperformanceplus.co...s.php?service=6

link no work :(

[Phoenix]

i think he meant this:

http://www.exoticperformanceplus.com/services.php?service=6

[BET IT]

Originally posted by Durien512
Boltons with Tires will get you there

:werd:

[alexWS6]

ET streets and !learn to drive mod.

[Blkout]

Originally posted by Bayouvette
4.10's and drag radials..
thats it..

And a cold air induction, but yes, that's about all it takes.

[Blkout]

Originally posted by habib
4.10s, air intake, et streets


Yep!

[HOTCIVIC]

Originally posted by dvandentop
$$$ :D

some drag radials, and Nitrous and cold air intake and a good driver :D

That's to get deep into the 10s, not 11s. ;)

[dvandentop]

i cant wait to get kicked outta track once i get my rear gears and cam and some sticky tires since i wont have a cage :D

[JBsZ06]

How about this?

(report from Z06 owner, not me)

Stano, A corvette owner wanted to make more power without sacraficing comfort or drivability. Basically, he wanted the car to act completely stock, just have a bunch more power. Living in CA, he also didnt want to deal with exhaust mods (long tube headers.etc) that would cause me problems with the " smog police". he saw the numbers posted with the AFR heads when they made over 470 hp LAPD's dyno so he decided to call LAPD and see what they could do he spoke with Al and discussed his goals and what he was trying to accomplish. To be honest, he was really hoping just to make over 400hp at the rear wheel and retain all the stock drivability. Al thought we could make that number with just the addition of the new AFR heads, in conjunction with his recent tuning & cold air intake. In a nutshell he was right....We made 409 hp and 391 ft lbs and all he can say is the car feels incredible! Power was up across the board over the entire dyno run.
Bottom line, his stock Z06 with the addition of the new AFR heads and cold air intake is making somewhere around 475 hp


2002 Z06 owners now have a nice option and adding headers should give around 425 at the rear wheels!

Nice mod..

Cost: 2300 for the heads..
approximately 8 hours of labor..(350 to 450 dollars)
Ls1edit (300 to 500)


Sell LS6 heads for around 800 and net cost..

1800 to 2300 dollars to get 475 at the flywheel!

Add headers and your over 500 at the flywheel..

Not a bad deal...