Will I beable to hook up??

[Chrisrokc]

Ok, I have started on my suspension and I have some stuff done but not all.... see sig.

Will I beable to hook up with... Hal Shocks/Strut Combo, 1' inch drop springs, lower control arm brackets, brm torque arm, and 10.5 et streets on two of my stock 16 inch rims + what I got now??

What kind of 60' foot can this suspension setup handle?

[Luke]

What kind of power are you making?

[Chrisrokc]

About 340+rwhp. Tranny isn't built yet. I am waiting till I get my traction down before I throw a converter in there. Oppss here is my sig

[BAIN]

You plan on adding a cam or spray? :cool: Because there is no way your making 340+ with the mods in your sig. in an A4:p

[Chrisrokc]

Oh I have a LS6 Intake and some damn good tuning now. :cool:

340rwhp should be easy for me to put down. Just need to get my ass to a dyno.

But heads and cam and tranny build up are going on right after the suspension is done. But I just want to know I will beable to hook up with the current set up.

[BAIN]

Not being an ass, but I still don't think you will put down 340+rwhp in an A4 with the mods you have ;)

I got just about every bolt-on and only put down 323rwhp unlocked converter so I would say don't get your hopes up:nosad:

[Chrisrokc]

I won't, I am hoping for those number since she has always been freakish. Stock I was able to pull my friend's m6 01 Trans Am that had a lid and a cutout. And yes he is a good driver. And I trap 110 in the 1/4 mile.

[BAIN]

I'm trapping 113-114 and a best of 116 so you really can't judge by that.;)

[Chrisrokc]

What kind of converter do you have? When I do mine I am having the tranny built to handle 600-650 hp or so with a SS3800.

[BAIN]

I have a TCI 3800;)

[blaSSt]

I'm pushing 365 RWHP with a similar setup and 10.5 ET Streets on OEM rims. I can't overpower the tires if I heat them up with a proper burnout. And I run a 1.7 60 ft.

http://www.ls1camaro.net/freehosting/Mark%20Smokin.jpg
http://www.ls1camaro.net/freehosting/Mark%20Launch.jpg