M6 Shifter Identification

[jmd]

GM installed the standard shifter, and then there was a Hurst upgrade available in the f-bodies. Y-bodies had just the one shifter available through the C5 years, correct?

What are the identifications of each f- body shifter? Anyone have pics of them? My 86 has been in storage for months so I can't look at the base-level 96 shifter in it. :o

Any stock or aftermarket shifter pics welcome in this thread!

[30thbird]

The C5 had a shifter option- sort of- the ZO6 has a stiffer grommet where it attaches to the torque tube.The std M6 has more rubber at this attachment point.
I have F car pics but i can't seem to post them.

[30thbird]

heres a try

[30thbird]

that was standard. this is the factory Hurst

[30thbird]

Heres a Hurts billet

[30thbird]

heres a B&M ripper with the stops( Mustang 5speed model)

[30thbird]

here a comparison of the B7M Rippers old with a separate handle and new integral model These are T56 mustang shifters.

[30thbird]

Here is the std. Fcar stick

[30thbird]

Here is a Hurst competition plus (Mustang 5speed model)