BradL
11-06-2004, 06:42 PM
This forums been dead for a while so I'll share my experience with this product. I got the headers and y-pipe installed and from the get go the Y-pipe had a horrible leak where the collector met the y-pipe. I had the band clamp tightened as tight as it could get and could still slide the y-pipe off the collector with very little effort. There are other small leaks at just about every other connection too. After driving for about 3000 miles i noticed a clunking sound coming from underneath the car and found out it was a broken cat. Qtp sent me another one and I put it on. About 3 weeks later the other cat started doing the same thing. Instead of bothering with replacing the cat I just took them off and gutted them. I found a couple people on the internet that had the exact same problems with theirs. I went to the exhaust shop yesterday and they quoted me about $250 to weld flanges on the headers and one on the back and to weld everything together. I wish I would have just went with duals!:(