Relocation Brackets

[fst02ls1]

I have a 2002 WS6 with stock suspension.... i am going to buy the complete fbody suspension package from bmr's website. There is an option to get relocation brackets. What exactly do they do? Do i need them??

Thanks

[262 77]

The relocation brackets are usually installed to prevent squating when car is lowered. Brackets reposition your instant center by altering your control arm angle for increased traction and anti-squat. Basically it corrects suspension geometry.

[fst02ls1]

will i need them if i do not lower my car?

[262 77]

You don't have to have them, although it may help with traction.

[02 WS6 TA]

Agreed with AOC SS. Some cars they seem to help, others they don't. I'd say try it without first, then if need be, throw a set on. :)

[MeentSS02]

http://www.geocities.com/motorcity/1701/bushings.htm

Read this too before you begin...it is stickied at the top, but a lot of people skip over the stickies.

[fst02ls1]

thanks for all the info guys.. i appreciate it

[bRa_DeN]

get the bolt-on brackets;)

[fst02ls1]

i heard bad things about bolt on stuff... like the bolts strip or let go....