PDA

View Full Version : I have dirt inside my guage cluster!!!

airmanb2b
03-07-2004, 03:17 PM
How do I get back behind it so I can clean behind the clear plastic?
smiley
03-07-2004, 04:37 PM
look for any white face guauge install writeup ;)
lucky_topher
03-07-2004, 04:42 PM
(off top of head)

- remove panel w/ trunkrelease w/ 2 screws & 2 hex-screws i think
- two hex-screws in top of cluster area
- two hex-screws below cluster (may need a socket extension)
- gauge comes out freely or you can use a screwdriver to 'press' on the notches to release the plastic part (2 on top, 2 on bottom)

or something close to that ;)
airmanb2b
03-07-2004, 05:52 PM
Right on. Thanks.