- Hopefully a solution to the Moser 12 bolt/torque arm problem
- Damn it, I F*CK#)D Up...
- spring rates ???
- Are subframe connectors dangerous?
- Brake Pads?
- Torque arm = insanely bumpy ride
- Axxis Ultimates
- qa1 shock settings
- Raybestos ceramic pads
- peskie squeak intermitate
- Slotted rotor direction
- C5 brake conversion
- LT1 Rear Caliper Question
- How about a SIG?
- help with new shocks
- Brakes??
- Swapping to a positrac rearend
- Regular suspension maintenance?
- OFFICIAL ANNOUNCEMENT: UMI Performance #8 CMC Z28
- spohn torque arm
- What kind of LCAs to get?
- New coilovers on their way.
- Koni/Ground Control coilovers coming....
- n00b ?'s
- Opinion on these rotors
- looking for a new pad for trucks
- Koni / lowering question?
- Help with K-member
- Baer DecelaRotors
- What torque arm?
- Hals QA1's vs Koni Sports
- Z06 calipers
- What Next for Suspension?
- Thinking about changing springs and new shocks.
- Rear LCA Bushings
- Subframe connectors: 2 point VS 3 point(triagular/diamond) worth the extra cash?
- Centric brake rotors any good?
- Considering Bilstein HD Shocks + DMS springs
- BMR Adj. Panhard Rod
- Good Big Brake Kit?
- what springs are good to go with?
- Installed new shocks/springs...noise issue?
- Quick one about heater hose mod
- ? about rebuilding/fixing abs actuator on backing plates
- those with spohn chassis mounted TA and a 9" come in..
- Lowering springs are they really needed??
- question about lowering car with G2 super springs
- BMR DS loop question
- KONI SA 4x4
- 95 Z28 road racing project
- props to UMI performance
- tourqe settings
- I got a shimmy at high speeds. Help?
- What are the must have mods to put power to the ground?
- New bushings?
- About to pick up my last susp part
- Relocation bracket GAP ?
- squeeking noise from rear
- Bleed brakes question?
- Will I notice a huge difference with a TQ arm
- got a bad problem with my brakes
- Rear safety loop....who makes one for loud mouth
- UMI Performance Web Site- Please Read
- Will it help?
- Guess there's no getting away from...
- Spongy Brakes????
- Tire Alignment spec question
- Stranoparts hollow swaybars?
- DMS springs are on!
- spohn adjustable torque arm
- New Product Release- Torque Arm Relocation Kit
- LG or UMI??
- K-Member Sneak Peek Pictures Released!
- Front air bag question...
- subframe question
- Upgrade Questions
- Spring rate??
- WOOOOOOTTTTTT!!!!! Won my bid on Ebay!!!
- Going racing with UMI Performance Suspension parts
- BMR or UMI driveshaft loop?
- is there a way to raise the rear 1/2 "???
- What shock is better?
- Rotoworks brake rotors?
- let master cylinder run dry....will I need a Tech 2??
- Dilema..
- Sam Strano(f-body suspension guru)
- What shocks and springs to use
- Z28 vs. SS suspension
- Which brand to go with????
- Got my Torque Arm, LCA's and Relo Brackets.. but i've got a few questions...
- Another ?
- ride height ?
- Can I still run my stock 16" wheels with a C5 brake conversion?
- I just got done with my nightmarish install of my KONIS. The good and bad inside.
- Need Help!!!
- SFC manufacturers
- UMI Performance Coil Overs
- Scrubbing after SFC install
- cross drilled rotors question
- ceramic pads..
- Next Mod????
- Dropping the bird and getting better handling...
- One man brake bleeder kit
- Fbody Aftermarket Brakes
- yikes....I think I found my cause of vibration at 70mph+...pinion angle related
- Adjustable torque arm setup
- What about V6s Springs?
- LG C5 Upgrade
- rear quarter panel flex and door rub
- Bushings constantly squeaking
- Unknown squeak while under a hard turn.
- How do you measure pinion angle?
- Rear Suspension Click
- Who using EBC brakes?
- Koni's
- What's with the GTO's struts?
- torgue arm?
- WTF squeek with brakes
- UMI Performance K-Member Released w/ Pictures
- Brake Job Tips
- Lowering springs
- broken suspension
- 3 or 4 Channel
- Eibach Pro kit on 01 SS with 315's
- LCA help!
- replaced rear rotors and pads, now Ebrake not working
- GM rotor warning...
- Rotors & Pads off Ebay??
- Video & Mp3's (Weird Noise) Wheel Bearing? Rear Dif? Suspension? Brakes?
- Panhard bar: poly/poly, poly/rod or rod/rod
- New brake pads installed....
- Brembo Blanks
- Break In for EBC Green Stuff Pads w/ New Rotors
- GForce suspension installed, no more torque arm
- I've added Bilsteins, now what?
- Braking problems, need experts
- thunking that changes with speed from rear of the car when slowing
- WS6 springs vs non-WS6
- Full Line of Baer, Wilwood, SSBC and Powerslot Brakes!
- Heater Hose Mod out back...problem
- Suspension question..
- 17" TTII vette brake conversion
- Anybody have problems with Spohn TQ Arm
- check out what the brown truck delivered today!!
- New Product- Bolt-In Control Arm Relocation Brackets
- [b][color=red][size=3]Nominate fellow board members as Techies[/size][/color][/b]
- shaking
- Vibration
- Drag Brakes?
- Wheel bearings going out at 50K Miles?
- Sub-frame connectors or torque arm??
- popping sound?
- Grinding noise when I turn the wheel
- stud removal
- Want to lower my car soon
- popping lower a-arms
- Time to uprade my front brakes.
- Yea so... the back passenger side of my car sits about an inch lower than the rest!!!
- tie rods
- 2002 LS1 Z28 w/traction control Braided Brake Line Options
- ZO6 Big brake upgrade!
- Cut my front Eibachs to level out my 02 Z28
- Where can I get a set of Baer discs and pads
- Panhard bar in but adjustment question......
- C5 brake upgrade is in....
- 3315s in the rear, eibach prolines or sportlines?
- pricing out shocks, recommendations?
- Urgent Help Needed Guidelines
- need help determining pinon angle.
- LG C5 Brake Upgrade
- Got some J&M LCA's/ no instructions!
- Know any good chassis design books?
- Question about CV joints and whatnot
- Rotors to 1995 Camaro 3.4L V6
- Drag Bags
- Tubular K-Member Installation
- Which one do I order?
- Excessive Front Wheel Movement
- New Rotors are Here!! Installation question....
- Tubular or boxed SFC's??
- Abs Inop!
- New bushing for my slp phb
- Took the car to the dealership for the 3rd time for steering problem
- Ceramic pads squealing?
- Jegs Brakes Sale
- eradispeed with hawk
- Wheelhop issues
- Swaybar bushing size?
- Crimped a line, is this a big deal?
- Couple newb questions
- Creaking noise coming from left rear
- Imput please...
- Tunnel Mounted T/A w/TD Exhaust on 98Z28?
- UMI single adjustable LCA's and panhard
- changing rear pads/rotors...
- Rotors...
- GM part # for stock shocks on an 02 TA WS6
- EXPERTS: 315's And RUBBING HELP PLEASE
- Spohn Available at MarylandSpeed
- shocks for a 1" drop
- Rear pass side lower than driver side.
- GM rotor warp, wtf?
- suspension?
- My brakes are in!!
- Replacing rotors, pads as well??
- What kind of suspension do Fbody's have?
- I need new suspension!
- Suspension overhaul for 1994 V6? Eibach pro-kit, SLP Bilstein?
- polished or chrome brake calipers
- ZENN (CHEAP) Springs...
- Clicking noise in the rear...
- rear brakes grab and then release...
- so how can you tell when your shocks are blown?
- who sells tunnel brace that's a flat plate?
- Buddy Needs susp help and 15" help
- Rattle on rear passenge side
- Steering Issue Help
- Ball joint puller
- ls1 brakes, which way do the pads go ????/come inside
- Front Brake Line
- Lowered car wheel alignment specs
- does anyone have a how to on spring install?
- about C5 upgrade?
- What pads should I get? Rotors to!
- help???
- how t oreplace shocks on 4th gen f-body
- Replacing rotors. Quick question
- Another brake install question
- UMI Torque arm/crossbrace mount install, mysterious clunk
- Cut stock springs for a 2" drop on C6 19's
- Adjustable PHB
- shock tower brace....opinions please
- rear springs not coming out
- Pacesetter ORY + Drop springs
- Lowered car alignment specs question
- Koni or QA1?
- Which Tire?
- need help changing rotors
- Creaking and low traction light in rear of car.
- pedders packages
- true 10.5 or wider drag slick
- Sway bar SQUEAK???
- I posted in the wrong place....dah(BRAKES}
- Raising the car back up
- Pedders and Rocksand Racing
- 3 pt SFC with True Duals?
- Painting calipers
- Rear suspension setup
- Edlebrock Torque arm???
- Suspension question......