- [color=blue][Size=2][B]Torques, PCM, DTC, General Information[/B][/Size][/color]
- rear end is history
- Torque Convertors
- Cooler and temp gauge installs
- Just installed 4.10's!!
- What fluid are you running in your '01+ M6?
- Changing Converter, Have few questions....
- ~~~~~ Moderator Marker ~~~~~
- Is 3.73 too much gear for the 1/4
- Which HD clutch setup
- Moser rear question
- Are 3.90's really loud?
- rear diff fluid
- ok how bad is this??
- a4 to m6 tranny swap help
- what converter
- AAM Rear Cover Sealant
- Driveshasft = owned
- Clutch ?
- What gears to get?
- any advice for trans. cooler install w/high cap. radiator?
- SQUEAK after clutch installation!!!!
- Tranny leaks
- What can happen if the trans fluid level is too high?
- McCleod clutches?
- Is this a good deal for a TC?
- Has anyone heard of Raybestos Z-Pak?
- What rear do I have
- How hard is it to install a new clutch....
- how long should this take?
- Best clutch?
- converter locking up?
- Flywheel retention tool
- Bad vibrations
- Gear ?
- Corvette transaxle
- moser or strange? opinions.
- Tunnel Brace
- Trany fluid
- Rear End has moved foward. Tires arent equal in well.
- I'm going to be in need of a clutch....
- Performance Parts for A4
- how much will 3.42 gears
- Stall Converter
- 12 bolt ?'s
- Question about transmission dipstick.
- removing old u joint from drive shaft?
- Im still having trouble shifting at high rpms...
- Post clutch install squeak mystery solved- something to look out for
- 12 bolt install now complete, one more question.
- Shift kit question
- Broken/Worn Posi Symptoms?
- Spec stage 3 is in!!
- Jegg's torque arm got pissed off at the car!
- Someone told me For 2000< trannys that Synchromesh will kill the tranny!
- Let's say you needed something more than a 12-bolt...
- Need shift points with TCI 3500 Stallw/ 3.42's
- Need some experienced inout please
- Rear end fluid change help
- Manual Fan Switch ?
- yank sportsman pro tranny
- Has anybody ever made their own HP 4L60E?
- SES Light and Hard Shifts
- chatter - stock clutch
- Need help-transmission.
- question about rear end ratio as pertains to drag racing.
- Manual Valvebody for '00 4L60E?
- how to get cover on moser to seal????
- Stall w/3:73's?
- Help!! New Clutch Problems
- burning clutch
- Gear install help!
- Moser's Breather
- currie vs moser vs strange
- Car studders at low rpm....
- one more rear end question.........
- Positive stops and the M6,
- Hurst shifter code on door sticker???
- Help with 4L60e rebuild parts
- short stick ?
- Experts Please Help Diagnose
- question about dyno charts with a4 and converter
- Whats better, bolt in or weld in Relocation brackets?
- help with diff problem....NEED HELP ASAP!
- Clutch & Hydraulic Suggestions for my setup?
- Spec Stage IV noise
- Confused on Hydrolics .. .etc
- Whats the goin rate for:
- 4l60e problems
- Burning smell (from clutch)?
- What converter should I get?
- mcleod street twin or ram powergrip series clutch
- Clutch Installtion guide
- Need help!!! No reverse in Auto Tranny
- Tranny waiting to kick down.
- a4 trans help
- Torque Specs?
- Call me crazy, but I think the factory Hurst has postitive stops.
- Need help with rear end
- centerforce vs ls6 clutch
- Need rearend fluid info
- Steeda Shifter for T-56
- Need Help! Tc Problem!
- Bmr Torque Arms
- converter lock-up ?
- 1st gear gone and 3rd gear syncro problem. How much to fix?
- WTF, car still wont go into gear at high rpm's.
- What gears should I get?
- Leaky MC
- Gear Installation Guide?
- loud throwout bearing?????
- New Moser 12 bolt making odd noise?
- 3 or 4 channel...Quick Question
- Happy ending for rear end noise!!
- Removig backing plates
- Preventing Mis-shift damage by re-programing?
- Best oil weight for 98 AUBURNS?
- 4.10's are in!!
- If I Did Change Stalls...
- Grinding in 3rd-4th-5th
- What is an alluminum flywheel worth
- Cartek Clutch/Hard/notchy shifting users in here.
- Shifter shakes/vibrates in 6th gear
- What are stock WS6 clutches rated for?
- NOT A HAPPY CAMPER!! ("Strange" Gear Problem)
- Help question about trans.
- M6 Transmission noises...
- Ratteling rear end gears
- What Gear Does Everyone Think I Have?
- Help! My car needs a tranny rebuild, does this sound right?
- moser 12 bolt
- Spec Stage 3 in a 99 V6 Camaro
- 3.55 for a 10 bolt?
- Grinding gears
- Intermittent A4 problem - Autotap inside
- Hurst notchy?
- Knocking noise when not accelerating
- Gear/Speed Calculator?
- flywheel
- Question for B&M Ripper users inside please
- Advantages of an Adj. Master Cyl on a stock '01 clutch?
- Lincoln 8.8 rear end
- 1999 camaro SS rear end makes a grinding noise during decelleration
- Anyone Built Their Own Rear?
- help.......my diff is leaking........
- Any M6 guys have first hand experience w/
- Need Help
- gear and track time question
- Stock pressure plate question
- How much to replace tranmission front seal?
- How long does it take for a restall?
- Trans cooler HELP!!!
- Top of transmission filter won't come out.
- How to Learn to Rebuild 4L60E?
- Gear installation
- M6's w/ 3.73's ...
- P0757 Shift Solenoid Suck on?
- GF clutch is whack!?
- Will it go out in third?
- need help a4 to m6
- Chattering sound
- Trap Speed Increase with 3.73/4.10
- How much horsepower will the t-56 take?
- Car feels like it "buckles" when I got wot...
- Need Help Asap!!!
- Hey guys, help me with a rear end problem....
- Going to be putting Redline in my rear
- Poly transmission mount...more vibration?
- Thread Size - Stock Shifter
- Converter lock up switch...
- Reducing WOT vibration from poly mount?
- Any art carr Converters in here?
- Th400
- Th400
- Driveshaft Removal/Install
- Whats wrong with my Mcleod master cylinder?
- Clutchmaster chatter
- What Torque Converter?
- 1LE Transmission Mount...$41? YOU GOTTA BE KIDDING ME!
- What parts do I need and where can I get a posi unit?
- Changing tranny mount
- Quick TQ arm question..
- i need help with prices...
- after motor mads are complete & TC
- alignment question
- skip shift eliminator not working
- 700r4?
- how much abuse can a stock M6 take?
- Short Throw shifter noises?
- If you have a stall in your car do you need a cam?
- Do You Work With Car Parts?
- help! clutch sticks to the ground!
- Hole in Diff Cover!
- Centerforce Clutch???
- Difference between 2-3 series carrier?
- backing plates?
- 1LE or Stock tranny mount...what does it come with?
- Which tranny?
- can pinion angle affect traction?
- Where to find three series carrier and ABS ring?
- nonTCS rear in a TCS car?
- Please help me decide between an SY3500 & an SS3600
- Redline Oil special
- Clutch might be going.. need advice
- Question about clutch hydraulics?
- Put in my 1LE tranny mount...car feels smoother and slower!
- TC guys , I need help??
- Strongest T-56?
- Is rev matching hard on the tranny?
- noise when clutch starts to bite
- 7.5 & 7.625 ring gears whats the deal
- Anyone drive with the Spce Stage 5? Just got one.
- NEED HELP! Pin will not go back into differential (strange 12 bolt)
- Need a new clutch
- Flywheel question...please help.
- help about rear
- WHat rearend is for me?
- Hd Eaton Posi Question
- SPec Stage 1 VS Stock
- HELP w/ bleeding the clutch
- Spec 3 or Ram PowerGrip
- The smell of clutch in the air!!!
- weird noises???
- Anyone useing the Zpak 14 disc 3/4
- What exactly makes the stock 10 bolt rear bad?
- 12-bolt gears???
- GM 3.73 part number?????
- Need help getting new clutch alignment dowel
- ACPT Driveshaft
- need help lining up tranny
- Rear wheel bearing question
- Pro 5.0 question
- 4L60E... Help
- Do they make oversized axle bearings for the stock 10-Bolts?
- Thinking of getting Spohn Extreme Duty DS...suggestions?
- Wanna get a new tranny.
- 12 bolt w/ 4.11 is in!!!!!!!!!
- How can I explain to someone about stalled auto dyno #'s??
- Rear end noise?
- Transmission Question
- Clutch problems...can't drive car! Please help!!!
- Are all 10 bolt rearends limited slip
- Aluminum driveshaft v.s. Steel
- Torque Converter Install
- yet another rear end ?
- driveshaft loop?
- rear gear pinion seal
- Short stick question?
- Reverse VERY HARD TO GET INTO
- Looking at getting a new shifter...